06 February 2011

Coming together...slowly

A little more's been done this weekend on the box. As you can see, it's a fairly slow and methodical process to assemble each piece of the sides in turn as only bit of ebony can be stuck on, then cleaned off...so it does take a time. The pic shows the first of the long sides with the lid section glued to the box.

The narrow 8mm strip in the middle will eventually be sawn through, to make the lid and base. Once it's been planed and fitted, I plan to glue some 3mm ebony back on top to make up the thickness to 12mm, but the four pieces on each half will be mitred so no end grain is going to be seen. Also, the same with the lid.

Sounds complicated?...don't worry, it is! Plenty of time for cock ups then...

Hinging is one of those things that I dread, especially when making something as fiddly as a small box. Help is at hand though as Andrew Crawford has recently introduced some new SmartHinges which although a bit stretchy on the pockets, look to do the job rather well.

Even better, they're claimed to be very easy to fit, which has to be a bonus.

No comments: